Parameterisation
Wieland Electric | BA000580 | 6/2009 (Rev. A)
23
If a new panel is applied in the overview window (by setting the corresponding check
mark), an additional window is displayed where the panel type can be selected.
The type numbers displayed there correspond to the type numbers of the ENOcean pro-
files and should be stated in the documentation of the room control panel. Otherwise, the
short descriptions after the type number can be used for orientation. The abbreviations in
the list have the following meanings:
•
PBtn – Presence button
•
Temp – Temperature value of the internal sensor
•
SetP – Setpoint controller
•
TSw – Fan stage
•
SSw – Slide switch
•
rH – relative humidity
Overview
EnOcean Object
Room control
panel
selection