Parameterisation
24
Wieland Electric | BA000580 | 6/2009 (Rev. A)
After you have clicked on "Apply", the selected network variables are combined into one
panel in the tree structure. If you clear the check mark in the overview window again, this
combination will be undone again.
7.4
Panel
By selecting a panel in the tree structure, you can change the assignment of the individual
radio channels and their function at any time.
The combination of the network variables into one panel only provides better clarity and
simplified parameterisation. It can only be performed in blocks of four whereby only the
blocks (channels 1-4, 5-8, etc.) displayed in the overview can be formed.
Depending on the panel used, the teach-in of the radio channels is also simplified via
this block formation whereby all four channels can be stored in one step.
You can select the EnOcean Profile Type under
Panel Types
; optionally, you can also
select a user-defined type.
A new, function-related name can be granted under the values 1-4 for each of the as-
signed network variables which improves the processing for the binding. You must con-
firm a change by pressing the
Rename NV
button. You can also adjust the functionality of
the individual channels later.
In the
Byte Assignment
area, you change the assignment of the data bytes sent to the
network variables. The standard settings correspond to the requirements of the respective
EnOcean profile.
Panel functional-
ity parameterisa-
tion
