Parameterisation
26
Wieland Electric | BA000580 | 6/2009 (Rev. A)
7.5.1
Button / Switch transmission element
After you have selected the
Switch / Button
transmission element, you can roughly spec-
ify the functionality in the
sending content
area in the first step. The
Switch / Button
value
,
Presence Information
,
Scene Number
values are available. This preselection lim-
its the other parameterisation options as far as is necessary and determines which other
settings windows will be displayed.
You determine the sending behaviour of the network variables in the bottom area.
7.5.1.1
Switch / Button transmission element (Switch / Button value)
Due to the very different applications of this transmit type, the possible settings are very
extensive. The plug-in supports you during the parameterisation using function template
which correspond to those for L
ON
M
ARK
specified profiles.
The functionality can be selected from a list in the Input Function area. The type of the
sensor (switch or button, single-face or double-face) and the use are parameterised here.
The following predefined values are available:
•
Button, single-face (switching)
•
Button, double-face (switching)
•
Button, double-face (dimming)
•
Button, single-face (dimming)
•
Button, double-face (shutter), with end angle*
•
Button, double-face (shutter), without end angle
•
Button, single-face (edge control)
•
Set value
*the corresponding functionality must be supported by the shutter actuator used (e.g.
Wieland
gesis
RM-0/2W SI, 83.020.0404.0 or Wieland
gesis
RM-0/2W DC, 83.020.0407.0)
The plug-in performs all other settings automatically and adapts the corresponding pa-
rameters to the underlying L
ON
M
ARK
profiles.
Switch / Button
basic data