Parameterisation
28
Wieland Electric | BA000580 | 6/2009 (Rev. A)
Up to five different telegrams per button press can be parameterised here which are trig-
gered depending on the timeline of the button press. Thereby, the timeline is defined as
follows:
•
Press
telegram which will be sent directly when the contact is closed
•
Release
telegram which will be sent after opening of the contact before ex-
piry of the time defined under
Short button press
•
Hold
telegram which will be sent if the contact remains closed for a time
longer than defined under
Short button press
•
Long Hold
telegram which will be sent if the contact remains closed for a time
longer than defined under
Long button press
•
Release after hold telegram which will be sent after opening of the contact after expiry
of the time defined under
Long button press
In the case of single-face functionality, a first and a second button press are also differenti-
ated in order to be able to realise a toggle function. The following values are available:
•
Off
Switch lighting
•
On
Switch lighting
•
Down
Dim lighting, shutter
•
Up
Dim lighting, shutter
•
Stop
Shutter
•
Down to end angle Move shutter down with end angle control*
•
Reference movement Shutter reference movement for the automatic travel time deter-
mination**
•
INVALID
an invalid command (e.g. for release of prioritisations) is transmitted
*the corresponding functionality must be supported by the shutter actuator used (e.g.
Wieland
gesis
RM-0/2W SI, 83.020.0404.0 or Wieland
gesis
RM-0/2W DC, 83.020.0407.0)
**the corresponding functionality must be supported by the shutter actuator used (e.g.
Wieland
gesis
RM-0/2W SI, 83.020.0404.0)
The maximum and the minimum value of a dimming telegram and the dimming step size
can be specified here in the bottom area.