Wieland
podis
system
Manual V 1.03 / ref. no. 00.000.0059.0 / 28.03.2001
3 Commissioning
and
maintenance
3.1
Safety notes and measures
3.1.1
Staff selection and qualification
All project design, programming, installation,
commissioning, operational and maintenance
tasks connected with the automation system
should only be carried out by trained personnel
(e.g. electrical engineers).
The project design and programming staff
must be familiar with the safety concepts of
automation technology.
The operational staff must be instructed in the
control system and know the operating
instructions.
The installation, commissioning and
maintenance staff must have the necessary
training to access the automation system.
3.1.2
Conditions for operation
The energy bus systems have been designed according to the
latest technology and the recognised safety regulations.
However, risk of death or personal injury to the user or a third
party or damage to machines, installations or other property
may occur during usage.
The implementation of the energy bus systems must be
technically correct according to the stipulated conditions. The
operating instructions must be followed with awareness of the
safety issues and risk factors. The correct and safe operation of
the control system requires proper transport, storage and
installation as well as careful operation and maintenance. Any
faults that can interfere with safety must be rectified
immediately.
The energy bus systems are only intended for the supply of
control systems, machines and installations. If they are used for
any other purpose, they do not meet the specified conditions. In
this case, the manufacturer is not liable for any resulting
damages.
In order to use the energy bus system as stipulated, please
observe the instructions regarding the mechanical and electrical
configuration, commissioning and operation as described in this
manual.
WARNING
Use of specialist staff is
required
Prerequisites for proper
use
