2.2 Main Switch
The green illuminated rocker switch works as a global inhibit input.
●
0
Power outputs disabled
●
I
Switch is lighting, power outputs may be enabled by the remote control.
This switch is a logic switch only. It does not disconnect the mains supply.
With the
Alphanumeric Display Option
the switch is omitted.
2.3 USB Connector
USB Socket
Pin Signal
Comment
1
VCC
2
D-
3
D+
4
GND
Table 2: USB Connector Pin Assignment
This is the standard USB connector type B.
2.4 Ethernet Connector
RJ45 Socket
Pin Signal
Comment
1
TX+
2
TX-
3
RX+
4
GND 1
5
GND 1
6
RX-
7
GND 2
8
GND 2
Table 3: Ethernet Connector Pin Assignment
This is the standard NIC configuration.
You need a
1:1-cable to connect a to a HUB, or a
cross-over cable to connect to
another NIC (e.g.
a computer
).
There is no automatic signal
crossing like with some routers
.
2.5 Water Cooling Connection (Optional)
The water connections are made with quick couplings series LC 6.4 mm from
Colder
Products Company
(CPC). We recommend an elbow mating plug with shutoff, e.g.
LCD230-04.
Consider that water inlet and water outlet are
not
exchangeable.
The safety valve may not be readjusted by the customer.
8. June 2010
3
*00679.A1
