18
3.2
Troubleshooting
Box rotator model
Problem
Solution
All models.
The box rotator is not in a horizontal position if
the piston rod of the cylinder is fully retracted.
Loosen the two lower bolts M30 on the
piston rod of the rotating cylinder. That
allows the fork carrier to be straightened.
After straightening, firmly secure the two
lower bolts M30.
All models.
There is some play in the bearing (tapered roller
bearing) on the shaft of the fork positioner.
Loosen the lock nuts of the socket set
bolts; fasten the socket set bolts by hand
in the locking plate and turn one quarter
back. Proceed with tightening the lock
nuts.
Table 3.2.1- Troubleshooting
Please contact your dealer for any further concerns you may have. He will be pleased to assist.
Summary of Contents for K55A
