English
4
SENSOR
An
ELD-H
sensor will last between 25 and 30 hours of continuous use. A failed or failing sensor will be
indicated in one of the following ways:
1. Unstable or erratic operation of the unit and many false alarms, even in pure air.
2. A continuous “siren” sound.
SENSOR REPLACEMENT
In either case, replacement of the sensor is necessary:
1. Turn the power off.
2. Locate the replacement sensor in the battery compartment.
3. Unscrew (turn counter clockwise) the old sensor from the end of the probe.
4. Screw (turn clockwise) the new sensor into place.
Replacement sensors
Part Number
ELS-H
MAINTENANCE
The
ELD-H
should provide years of service with little maintenance aside from changing batteries and sensors.
The case may be cleaned with a shop towel moistened with water and a mild detergent. Do not use solvent of
any kind.
Summary of Contents for ELD-H
