17
WIKA operating instructions process pressure transducer, model CPT6020
0020507001F 05/2019 EN
EN
Operation
6.1.2 CPT6020 Commands and Queries
Commands with complex outputs are explained In tables following the command set.
The following convention is used for the following command set tables:
n – 1 placeholder for digits and decimal point
C – 1 character placeholder for alpha character A-Z
<cr> - carriage return – ASCII 13
<lf> - line feed – ASCII 10
± - 1 place holder for a + or – sign, or blank which i
¬<sp> - 1 place holder for a space
X – address placeholder or ‘*’ for universal queries to be sent to all instruments
Y(1,2,3…) – strings as defined in description
<yy,mm,dd> - Last two digits of year, month, day.
All commands, queries, and responses will be terminated with a <cr><lf>.
All commands that are password protected are designated with “(Password Protected)” in the Query column below.
Global Commands
Query
Command
Data
Description
N/A
ADDRESS<sp><C> (RS-485 only)
C
Transducer address 0-9,
A-Z
*IDN?/ID?
N/A
Manu,Model,SN,SW Version
Manufacturer, Model,
SN, SW Version
N/A
SAVE
Saves Data to EEPROM
TYPE?
N/A
C
Pressure type - 1 char
FILTER?
FILTER<sp><n>
n
Filter percentage 1 to 99
WINDOW?
WINDOW<sp><nn>
n
Set 0 ... 99 to correspond
to a filter window of
0 ... 0.099%FS
BAUD?
BAUD<sp><n>
n
Baud Rate - 9600,
19200, 57600, 115200
N/A
CERR
Clears Error stack
N/A
DEFAULT
Defaults parameters per
Table 6.1.3.2
CMD_SET?
CMD_SET<sp><n>
n
Selects command set
per Table 2.1 (This
command is included in
all command sets.)
N/A
PWD_CHANGE<sp><n,n>
nnnn,nnnn
Change password <n,n>
= <old,new>
N/A
PWD<sp><n>
nnnn
Send password
Pressure Related Commands
PRESS?
N/A
Returns configurable
output from active
channel in current units
see Table 6.1.2.10
& Output Control
Commands section.
