10
WIKA operating instructions process pressure transducer, model CPT6020
0020507001F 05/2019 EN
EN
The operator is obliged to maintain the product label in a legible condition.
The operator must ensure that:
■
Mechanical vibration, mechanical shock are minimized
■
The transducer is installed in areas without soot, vapor, dust and corrosive gases
■
The transducer is not used in hazardous environments, flammable atmospheres
■
The operating personnel are regularly instructed in all topics regarding work safety, first aid and environmental protection and
know the operating instructions and in particular, the safety instructions contained therein
■
The transducer is suitable for the particular application in accordance with its intended use
■
Personal protective equipment is available
3.5 Personnel Qualification
WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and damage to equipment.
▶
The activities described in these operating instructions may only be carried out by skilled personnel who have the
qualifications described below.
Skilled personnel
Skilled personnel, authorized by the operator, are understood to be personnel who, based on their technical training, knowledge
of measurement and control technology and on their experience and knowledge of country-specific regulations, current standards
and directives, are capable of carrying out the work described and independently recognizing potential hazards.
Operating personnel
The personnel trained by the operator are understood to be personnel who, based on their education, knowledge and experience,
are capable of carrying out the work described and independently recognizing potential hazards.
Special knowledge for working with instruments for hazardous areas:
The skilled (electrical) personnel must have knowledge of ignition protection types, regulations and provisions for equipment in
hazardous areas.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
Safety