WIKA operating instructions, model F1201
EN
14505091.01 08/2021 EN/DE
5
F
2. Design and function
2. Design and function
2.1 Overview
2.2 Description
The compression force transducer is designed for measuring static and dynamic
compression forces. The compression force transducer consists of a measuring spring
on which strain gauges are applied. The measuring body is made of corrosion-resistant
stainless steel and is elastically deformed by a tension/compression force introduced
in the force direction. The resulting mechanical tensions are measured by the strain
gauges and output as an electrical output signal.
The strain gauges are arranged so that two of them are tensioned and the other two are
compressed when a force is applied to the transducer.
The pick-up circuit includes correction and compensation resistors to eliminate unwant-
ed effects on the zero signal and characteristic value.
2.3 Scope of delivery
■
Compression force transducers
■
Operating instructions
Force introduction (F) on crowned surface
Measuring spring
Electrical connection
