WIKA operating instructions, model F1201
EN
14505091.01 08/2021 EN/DE
7
3. Safety
3.2 Intended use
Model
Version
F1201
Standard version measuring ranges 0 ... 5 t to 0 ... 30 t
These instruments have been designed and tested in accordance with the relevant
safety regulations for electronic measuring instruments. Any usage outside of this is
deemed to be improper. The faultless functioning and operational safety of the transduc-
ers can only be guaranteed when complying with the instructions given in the operating
instructions. During its use, the legal and safety regulations (e.g. VDE 0100) required for
the particular application must additionally be observed. This also applies accordingly
when using accessories. The compression force transducer is no safety element in the
sense of its intended use. Faultless and safe operation of this transducer requires proper
transport, professional storage, installation and mounting as well as careful operation
and corrective maintenance.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be
observed. Improper handling or operation of the instrument outside of its techni-
cal specifications requires the instrument to be taken out of service immediately and
inspected by an authorised service engineer.
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Plugs and sockets must be
protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
