47
10 Supplement
WIKA Operating Instructions - Process pressure transmitter IPT-1*
Product temperature front-flush threaded fitting G1 A according to EHEDG, threaded fitting
M44 x 1.25 as well as hygienic fittings, depending on seal
15)16)
Ʋ
FKM (VP2/A)
-20 … +150 °C (-4 … +302 °F)
Ʋ
EPDM (A+P 75.5/KW75F)
-30 … +150 °C (-22 … +302 °F)
Ʋ NBR (COG)
-20 … +150 °C (-4 … +302 °F)
Vibration resistance
mechanical vibrations with 4 g and 5 … 100 Hz
17)
Vibration resistance - Version with double
chamber housing of stainless steel
mechanical vibrations with 1 g and 5 … 100 Hz
18)
Vibration resistance - Versions up to
+150 °C (+302 °F)
mechanical vibrations with 0.7 g and 5 … 100 Hz
19)
Shock resistance
Acceleration 100 g/6 ms
20)
Electromechanical data - version IP 66/IP 67
Cable entry/plug
21)
Ʋ
Single chamber housing
– 1 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm), 1 x
blind plug M20 x 1.5
or:
–
1 x closing cap ½ NPT, 1 x blind plug ½ NPT
or:
–
1␣x plug (depending on the version), 1␣x blind stopper
M20␣x␣1.5
Ʋ
Double chamber housing
– 1 x cable entry M20 x 1.5 (cable: ø 5 … 9 mm), 1 x
blind plug M20 x 1.5; plug M12 x 1 for the external
display and adjustment unit (optional)
or:
–
1 x closing cap ½ NPT, 1 x blind plug ½ NPT, plug
M12 x 1 for the external display and adjustment unit
(optional)
or:
– 1 x plug (depending on the version), 1 x blind plug
M20 x 1.5; plug M12 x 1 for the external display and
adjustment unit (optional)
Spring-loaded terminals for wire cross-
section up to
2.5 mm² (AWG 14)
Display and adjustment module
Voltage supply and data transmission
through the sensor
Indication
LC display in dot matrix
Adjustment elements
4 keys
15)
Not with hygienic fitting with compression nut F40 PN40/316L
16)
Version for oxygen applications up to 60 °C (140 °F).
17)
Tested according to the guidelines of German Lloyd, GL directive 2.
18)
Tested according to the guidelines of German Lloyd, GL directive 2.
19)
Tested according to the guidelines of German Lloyd, GL directive 2.
20)
Tested according to EN 60068-2-27.
21)
Depending on the version M12 x 1, according to ISO 4400, Harting, 7/8" FF.
