Operating Instructions - CPA2501
33
Air Data Test Indicator
CPA2501
6.4.3.2 Frames Channel
The channel setting in the Frames application provides a way to choose which channel(s) appears and
in what order within the Measure Application (Main Screen). Any installed transducer channel or an
emulated channel can be displayed in the Measure Application. In figure 6.4.3.2, the Dual Frame format
is set in the Frames format parameter, Ps is set as the top frame and Qc is set as the bottom frame. Ps,
Qc, Pt, Channel C (the remote transducer if connected) or the optional barometer could be placed in any
available position. If the Single or Triple frame format is chosen then the channels will appear as shown in
each of the respective frame position sets.
Frame
positions sets:
Single Frame
Dual Frame
Triple Frame
Resulting view in the Measure Application
Figure 6.4.3.2 - Frames Channel
In Figure 6.4.3.2-A, the Channels have been set for each frame format and the frame format has been
set to “Frame triple”. In the Measure App the resulting channel position will be: PS on top, Pt in the middle
and Qc on the bottom. The barometer reading (if installed) will appear as a selectable channel but the
reading will always appear at the bottom right in the Measure App.
Figure 6.4.3.2-A - Example channel frame settings
