Operating Instructions - CPA2501
45
Air Data Test Indicator
CPA2501
6.4.10 Unlocked Service Application
After the Password has been entered, the unlocked Service Application will appear (Figure 6.4.10). To
re-lock this screen, press the lock button.
Figure 6.4.10 - Unlocked Service Application
From the Unlocked Service Application, the Password can be changed by pressing the Enter button next
to the Change Password label. This will open a keypad where a new password can be entered and ac-
cepted by pressing the Check Mark [
].
i
Note: Please make note of a password change and save the new password in a secure
location.
The Unlocked Service Application is the access point to all calibration screens described in Section 10 of
this manual.
i
Note: Recommended calibration setup and explanation of calibration screen applica-
tions is covered in Section 10 of this manual.
