EN
14203024.01 10/2018 EN/DE/FR/ES
12
WIKA operating instructions models TG53, TG54
4. Transport, packaging and storage
4.1 Transport
Check the instrument for any damage that may have been caused by
transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property
can occur.
▶
When unloading packed goods upon delivery as well as
during internal transport, proceed carefully and observe
the symbols on the packaging.
▶
With internal transport, observe the instructions in chapter
4.2 “Packaging and storage”.
If the instrument is transported from a cold into a warm environment, the
formation of condensation may result in instrument malfunction. Before
putting it back into operation, wait for the instrument temperature and the
room temperature to equalise.
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport
(e.g. change in installation site, sending for repair).
Permissible conditions at the place of storage:
■
Temperature limits for storage and transport
-50 … +70 °C (-58 ... +158 °F) without liquid damping
-40 … +70 °C (-40 ... +158 °F) without liquid damping
■
Humidity: 35 ... 85 % relative humidity (no condensation)
Avoid exposure to the following factors:
■
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Hazardous environments, flammable atmospheres
4. Transport, packaging and storage
Summary of Contents for TG53
Page 24: ...EN 14203024 01 10 2018 EN DE FR ES 24 WIKA operating instructions models TG53 TG54 ...
Page 46: ...DE 14203024 01 10 2018 EN DE FR ES 46 WIKA Betriebsanleitung Typen TG53 TG54 ...
Page 90: ...14203024 01 10 2018 EN DE FR ES 90 WIKA operating instructions models TG53 TG54 ...
Page 91: ...WIKA operating instructions models TG53 TG54 14203024 01 10 2018 EN DE FR ES 91 ...
