102
WIKA Betriebsanleitung Prozesstransmitter, Typ UPT-2x
D
14068347.01 06/2014 GB/D
11. Detaileinstellungen
11. Detaileinstellungen
Voraussetzung:
Anzeige- und Bedieneinheit eingebaut.
11.1
Sprache einstellen
Verfügbare Sprachen: Deutsch, Englisch, Französisch, Spanisch
1.
Bedienmenü mit [↵] öffnen.
„Detaileinstel.“ auswählen und mit [↵] bestätigen.
2.
„Sprache“ auswählen und mit [↵] bestätigen.
3.
Sprache auswählen und mit [↵] bestätigen.
Sprache ist eingestellt.
11.2
Messstelle kennzeichnen (TAG)
11.2.1 TAG-kurz einstellen
TAG-kurz erlaubt 8 Stellen mit eingeschränktem Zeichensatz (Zahlen und Großbuchsta
-
ben). TAG-kurz kann auf der Zusatzanzeige angezeigt werden.
1.
Bedienmenü mit [↵] öffnen.
„Detaileinstel.“ auswählen und mit [↵] bestätigen.
2.
„Kennzeichnung“ auswählen und mit [↵] bestätigen.
3.
„TAG-kurz“ auswählen und mit [↵] bestätigen.
4.
Stelle über [▲] [▼] verändern und mit [↵] bestätigen.
Cursor springt zur nächsten Stelle. Vorgang für alle
Stellen wiederholen.
TAG-kurz ist eingestellt.
11.2.2 TAG-lang einstellen
TAG-lang erlaubt 32 Stellen mit alphanummerischen Zeichensatz (alle Zeichen gemäß
HART
®
Revision 7). TAG-lang kann auf der Zusatzanzeige angezeigt werden.
Einstellung erfolgt wie unter Kapitel 11.2.1 „TAG-kurz“ beschrieben.