31
WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
9. Configuration via display and operating unit
9.
Configuration via display and operating unit
9.1
Configuring the measuring task
9.1.1
Configuring pressure measurement
1.
Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2.
Select “Application” and confirm with [↵].
3.
Select “Pressure” and confirm with [↵].
4.
Select “Unit” and confirm with [↵].
5.
Select pressure unit and confirm with [↵].
Pressure unit is set.
6.
Go back one menu level using [ESC].
Select “Mode” and confirm with [↵].
7.
Select “Pressure” and confirm with [↵].
Mode is set.
8. Scale the measuring range.
See chapter 9.3 “Scaling the measuring range”.
9. Perform a mounting correction.
See chapter 9.5 “Mounting correction (offset)”.
