4
Installation Procedure
2. Slide top and bottom rails into pivot post
and secure with clevis pins. Plastic washers
are used between the rails and the post
(both sides of tubes).
NOTES:
The bottom rail with spring attachment bracket
must be oriented as shown below.
Make sure that the top rail closest to the pivot
post does not have a handle. The top rail with
handle is assembled to the rolling pivot post
at the opposite end of gate, see following steps.
Cotter Pin
(HWM1130)
Bottom Rail
(SP0125)
Plastic Washers
(HWM1480)
Clevis Pin
(HWM1100)
Top Rail
(SP0126)
Clevis Pin
(HWM1100)
Plastic Washers
(HWM1480)
Cotter Pin
(HWM1130)
