WIL-11160-E-09
Wilden
®
15
Disassembly / Reassembly
Step 10
NOTE:
Due to varying torque values, one of the following two situations
may occur:
1) The outer piston, diaphragm and inner piston remain attached to the shaft and the
entire assembly can be removed from the center section (Figure 10a);
2) The outer piston, diaphragm and inner piston separate from the shaft which remains
connected to the opposite side diaphragm assembly (Figure 10b). Repeat disassembly
instructions for the opposite liquid chamber. Inspect diaphragm assembly and shaft for
signs of wear or chemical attack. Replace all worn parts with genuine Wilden parts for
reliable performance. Rubber/TPE are not available.
Step 11
To remove diaphragm assembly from shaft,
secure shaft with soft jaws (a vise fitted with
plywood or other suitable material) to
ensure shaft is not nicked, scratched or
gouged. Using an adjustable wrench,
remove diaphragm assembly from shaft.
Summary of Contents for PRO-FLO P1500
Page 23: ...WIL 11160 E 09 Wilden 23 Notes...
