12
3.5 Enter Live Mode:
After finishing or checking all setting, Switch camera to the ON position to enter the live mode. The motion indicator
will flash red for about 5 seconds and the camera starts working after flash. It will immediately take pictures or
record videos when person or animal enters the area of the PIR sensor.
Caution:
To avoid potential false triggers due to temperature and motion disturbances, please do not aim the camera
at a heat source (e.g.: the sun, heated stone or metal) or nearby tree branches and twigs. The ideal direction to aim
at is the north and the open place without heat source. Also, remove any twigs close to the front of the camera.
Press the
key to choose the upper option.
Press the
key to choose the next option.
Press the
(SHOT key) to manually trigger the shutter. A photo or video (depending on the red mode key) will be
taken and saved to the SD card.
Press
OK
key to save the menu setting
Press
Mode
key to swift photo mode and video mode; review or replay the photo or video; swift the number, letter,
symbol when re-setting up mobile ID and Email.
The
Menu
on the keypad allows you to program the camera to work the way you want.
Summary of Contents for GUARD1 Series
Page 9: ...9...
