22
H. PIR Sensitivity
The sensitivity of the main motion sensor is set here. For interior areas and environments with little interference, such as
branches blowing in the wind, select “High”. Select “Medium” for exterior areas and environments with a normal amount
of interference, and select “Low” for environments with a high level of interference.
I. Date stamp
Here you can choose whether to save your photos with a time stamp. You can choose whether the stamp consists of the
time and date or just the date.
J. 4G Setup
Please refer below 4G Setup
K. Record audio
turn on the function, you can record sound while recording video.
L. Timer
Select “On” if the camera should only be active during a certain time period. In the screen menu that subsequently
appears, you can then set the start and end time for the active phase:
Input the hour and minute for the start/end of the active phase. Confirm your selection with the “OK” button and to close
this sub-menu.
The settings made here apply every day. The camera will not record any images outside of the active phase.
M. Password Setting
Select “On” if you want to use a password to protect the camera from unwanted access. In the following sub-menu, you
can set a 4-digit combination:
Confirm your selection with the “OK” button and close this sub-menu.
The set number combination will work when camera is on test mode.
Summary of Contents for GUARD1 Series
Page 9: ...9...
