23
If you forget the number combination, please ask the supplier for firmware to reset it to its factory default settings.
N. Serial No
Select “On” if you want to use a serial number to identify the camera. In the following sub-menu, you can set a 4-digit
combination:
Confirm your selection with the “OK” button and close this sub-menu.
O. Time lapse
With this function the camera automatically takes pictures at adjustable intervals. This is useful if you want to observe the
blooming of plants or the like, for example. When you confirm “On” with the OK button, you can then set the desired time
interval using the menu that now appears.
Input the hour/minute/second of the desired time interval.
Confirm your selection with the “OK” button and close this sub-menu.
P. Organization Name
The default setting is Off. The user can set up the logo or label on the photo that the camera takes
Confirm your selection with the “OK” button and close this sub-menu.
Q. Default Config
all the setting data will be back to the factory setting after you click this key.
R. Load Config File
Load menu.cfg from your SD card(that was made before)
Summary of Contents for GUARD1 Series
Page 9: ...9...
