background image

Thank you for purchasing a vanity set!  To get started, please first be sure you have all the necessary components. 

We suggest that you lay them all out on the carpet before assembling.  If for any reason you think a component 

may be missing, please contact our customer service team.

B2 Musical Box

(Right as you face the table)

*Please note: Your chair and 

vanity might look slightly 

different then the picture.

B1 Jewelry Box

(Left as you face the table)

Tools Needed for Assembly: 

Standard Phillips Head Screwdriver.  CAUTION: It is highly recommended that you not use power tools or electric 

screwdrivers as screws should not be over-tightened.

General Safety Instructions: 

Your vanity set is safety tested for 18-96 months.  However, it is recommended that caution be used at all times.  

Chairs are recommended for children up to 100 lbs.

Care Instructions: 

Wipe clean with non-bleach cloth.  If your item includes a cushion, please dry-clean cushion only.

Page 1 of 5

P: 866-727-0544             E: customercare@wildkin.com            www.wildkin.com

Vanity & Chair Assembly Instructions

ADULT ASSEMBLY REQUIRED. 

SMALL PARTS AND SHARP POINTS MAY BE PRESENT PRIOR TO ASSEMBLY. 

KEEP OUT OF BABY’S REACH.

PLASTIC BAGS CAN BE DANGEROUS.  TO AVOID DANGER OF SUFFOCATION, KEEP THIS 

BAG AWAY FROM BABIES AND CHILDREN.

WARNING:

Summary of Contents for Vanity & Chair






Reviews: