RESOLUTION
). In addition, you can specify here how the camera should handle the
transmission of multiple images from one motion capture (multishot). The option
MULTISHOT SEND g
ives you the option of indicating, for each of the maximum 5 photos
per motion capture, whether or not it should be forwarded. Your options here depend on
what you have set in the
CAM
tab under the
MULTISHOT
option. For example, if you
choose to forward Photo 1 and Photo 3 from a trigger, you will receive 1 email message
with both photos attached.
Max Num/Day:
Here you can set whether you want to use a daily limit for the number of
transmitted images. By default this option is set to
unlimited
, you can also choose to set
it between
1-99
images. This function is mainly meant to keep the costs in check. Note:
this limit is separate from the above described limit of 50 mails per day of the default
configured mail server under
SMTP
.
SMS CTRL:
Here you can configure how you communicate with the camera via the app on
your phone. The options are "
INSTANT
" or "
By Trigger
". Depending on the setting for
SMS Codes
, the instructions that you send from the app (both for adjusting the settings
and for the "
Get a Picture
" command) will either be processed immediately (setting
"
Instant
"), or they will be processed at the next synchronisation moment of the camera
(setting "
By Trigger
"). The setting "
By trigger
" is much more energy efficient than the
setting "
Instant
", because with the latter option, the camera needs to be constantly
connected to the GSM network to 'listen' for instructions coming in from the app. So keep
this in mind!
Daily Report:
Here you can specify whether
you want to receive a daily status report via
the recipient's e-mail address. If you set this
option to ON, you can then specify at what
time you would like to receive the report each
day. The report contains the following data:
IMEI
:
15-number IMEI number of
your camera
CSQ
:
a value between 1 and 31,
which indicates the signal
strength of the network signal.
The higher the better.
CamID
:
Your camera ID will be
displayed here, if entered.
Temp
:
This indicates the ambient temperature, as currently measured.
Date
:
This displays the date and time of the status report.
Battery
:
This shows the battery percentage.
SD
:
This shows the remaining memory and total capacity of the memory card (in
MBs)
Total Pics
: This shows the total number of pictures taken in the last 24 hours.
Send times
: This indicates how often images have been forwarded to your e-mail.
If the daily report is ON, you will also receive an e-mail with a picture of that moment
immediately after receiving the daily report.
SIM PIN:
If the SIM card you inserted in the camera still has a SIM pin code, you can
enter it here (if this is the case, a message about this will appear in the camera screen
