Wilfa HERRING, Operating Instructions Manual

Engl

ish

Engl

ish

10

11

OPERATING INSTRUCTION

1.  Put the opening of the bag in the 

vacuum chamber. Ensure that the 
bag does not cover the vacuum 
nozzle. 
 
 
 
 
 
 

2.  Press the cover down, put one hand 

to press the cover, the other hand 
to rotate the rotary button clockwise 
about 45 degrees to lock the cover, 
next step is seal or vac/seal process. 
 
 
 
 

3.  Rotate the rotary button about 45 

degrees counterclockwise to open 
the sealer and take out the sealed 
food.

Seal vacuum bags and rolls

1.  Plug the appliance in.
2.  Insert the opening of the bag into the vacuum chamber as the above 

pictures.

3.  Put the cover down and rotate the rotary button clockwise about 45 

degrees to lock it.

4.  Press the “Seal” button and the LED lights up, when the Led lights up, 

disappears, the sealing is done.

5.  Rotate the rotary button counterclockwise about 45 degrees to open the 

sealer, and then take out the sealed bag. 

Preservation with vacuum bag

1.  Plug the appliance in.
2.  Put the items that you want to preserve inside the bag.
3.  Clean and straighten the opening of the bag, make sure there are no 

wrinkles on the opening.

4.  Insert the opening of the bag into the vacuum chamber as the above 

pictures

5.  Put the cover down and rotate the rotary button clockwise about 45 

degrees to lock it.

6.  Press the “Vacuum/Seal” button and the LED lights up, then the bag will 

be automatically vacuumed and sealed. When the LED lights on “Seal” 
disappears, the process is completed.

7.  Rotate the rotary button counterclockwise about 45 degrees to open the 

cover, then take out the sealed item.

Note:

 If the food is wet, please choose Moist mode to make the sealing better.

Preservation with vacuum canisters

1.  Put the items inside the canister and cover it with the lid, insert one end of 

the hose into the Vacuum nozzle on the appliance, then insert the other end 
into the hole on the top of the canister lid.

2.  Make sure the rotary button is locking the cover. 
3.  Press ”Canister” button, it will now start to vacuum the air from the canister 

and create a tight seal. You can press “Stop” button to stop it from working 
any time. When the vacuuming process is completed, the appliance will 
automatically stop.

4.  Unplug the hose from the canister first, then unplug it from the appliance.
5.  When the stored items expire or need to be removed from the canister, 

please press down the button in the center of the canister lid to deflate air, 
then you can open the canister in a few seconds.