English
English
10
11
Adjusting the mist output
Push the power button to turn the device on. The
power/water supply indicator will light blue and it will
begin to humidify with MIN (minimum) mist output.
The bottom light will lid up.
Push the mist button to increase the mist output.
The mist level switches from MAX (maximum) to
MIN (minimum) and back, each time the mist switch
button is pushed. The selected mist level is displayed
indicated by the LED. Default mist output will always
be set to MIN (minimum) when the unit is turned on.
Caution:
Please take adequate care to prevent
excessive humidity. Wet floors from condensation can
form due to the room environment and conditions of
use. Please carefully adjust or turn off the device.
Adjusting the bottom light
Push the light button. The light will automatically light
up when the power is turned on. The light will light up
again when the power is turned on again, even if it was
previously switched off.
MAINTENANCE
Important:
Be sure to remove the power plug from the outlet before carrying
out maintenance.
Important:
Do not soak or immerse the power plug or the device in water.
Important:
We recommend daily maintenance to prevent the growth of bacteria
and scale inside the water tank.
Daily maintanance
Switch the power button to OFF and remove the power
plug;
•
Remove the top cover and water tank from the
device.
•
Remove the water tank from the device and empty
the remaining water in the tank.
•
Pour a small amount of water into the water tank,
firmly close the water tank cap and shake to rinse .
Weekly maintenance
Note:
If using the unit for multiple consecutive days, please carry out
maintenance by applying the following procedure once a week. If this type of
maintenance is not conducted, scale may form on the inside and shorten the life
of the equipment or cause a breakdown. Moreover, if the device continues to
be used with no maintenance, it may lead to the growth of bacterial and mould/
bad odour.
Switch the power button to OFF and remove the power plug;
•
Remove the top cover and water tank from the
device.
•
Remove the remaining water in the water tank and
at the bottom of the device.
•
Add dishwashing detergent to a soft sponge for
dishes and wash the water surface and water tank.
