English
English
12
13
•
Rinse the water tank well so that no washing up
liquid remains and dry the water tank thoroughly.
•
Gently clean the surface of the ultrasonic
membrane with a soft, dry cloth.
•
Soak a soft cloth in lukewarm water and wipe the
bottom and sides.
Attention:
Please do not use metal scourers, melamine
sponges, polishing powers, or solvents like benzene,
thinner, alcohol or other.
Maintenance before storing
Please conduct the following maintenance before storing
the device:
•
Follow the same steps under ’Weekly maintenance’
•
Dry each component before assembling it
•
Check that each component has fully dried, then assemble
the device and store it.
Error
Solution
The power/water supply indicator
does not light up and mist does not
come out
• Check the power plug inserted all
the way to the back of the socket?
• Is there a power cut?
The power/water supply indicator is
red and the power is off, even though
the power button is pushed.
• There is not enough water. Please
fill the water tank with water.
Strange noises accompany the use of
the product
• A ”burbling” sound comes out of
the main body. This sound is the
sound of water being supplied from
the water tank to the main body
and does not mean the product is
defective.
A strange noise can be heard from
the removed water tank.
• When you remove an empty or
nearly-empty water tank from the
main body, an abnormal sound from
the water tank can be heard. This
sound is related to pressure within
the water tank and does not mean
the product is defective.
Mist can’t be seen even when the
power is connected
• Is the power/water supply display
flashing red? There is insufficient
water, if it is flashing red. Please fill
the water tank with water .
• The mist may not be visible
depending on the balance between
the room temperature and humidity.
The mist output is switched to MIN
(minimum) even though it is not
being used.
• Was the power turned on again?
The default mist output will be MIN
(minimum) if the power is turned
on again, even if the mist volume
was on MAX (maximum) prior to
switching it on.
TROUBLESHOOTING
