Description
How to use
Before use
●
Clean the water tank with tap water when you use the unit for the first time
●
Take off the big and small outlet cap
●
Big and small outlet cap was fixed together; You can take out both only by taking
off the small outlet cap.
●
Take off the water tank from machine body
●
Take off the tank cap, and infuse tap water
●
Don’t infuse over 40 degrees water, aroma, chemical physic scour, etc
☆
Purified water will be better
●
Put the tank cover onto the tank and screw it firmly.
●
Ensure the lid is tight and don’t leak.
●
Put the water tank to the body properly
●
Put the Big and small outlet cap on water tank properly
☆
Big and small outlet cap can be rotated at 306 degrees with different direction
☆
Don’t put the steam outlet close to furniture and wall to avoid spotting or
damaging
●
When the water has been used, the “No water indicator” will flash to indicate you
to add water. When this occurs power will turnoff automatically.
☆
Refill water while the unit is in “Off” position.
☆
When you take off the water tank the unit will stop working for safety reasons.
