P.
8
Engelsk
P.
8
EngelskEnglish
P.
P.
SPRAYING
Press the spray button to spray water on clothes, as often as required.
Note: When using the water spray function, ensure that there is enough water
in the water tank, and you may have to pump the spray button several times
at first time you use the iron in order to start the spraying function.
BURST OR VERTICAL STEAM IRONING
Press the burst of Steam button to generate a powerful burst of
steam that can penetrate the fabrics and smooth the most difficult
and tough creases. Wait for a few seconds before pressing again.
By pressing the Burst of Steam Button at intervals you can also
iron vertically (curtain, hung garments, etc.)
Note: The burst steam function can only be used at high temperature. Stop
the emission when the temperature indicator light turns off, then start ironing
again only after the temperature indicator light has turned on.
DRY IRONING
For ironing without steam, follow the instruction in section “steam
ironing”, however, the steam control turning knob should remain in
position “O” (no steam).
SELF-CLEANING
The self-cleaning feature cleans inside the soleplate, removing
impurities. We recommend using it every 10-15 days.
Set the steam control turning knob to position O (no steam)
Fill the water tank to the maximum level.
Set the temperature control dial to MAX and wait for the pilot
light to turn off.
Pull the plug out of the socket and press the self-cleaning button
until the boiling water, steam, impurities come out.
When the soleplate has cooled down, you can clean it with a
damp cloth.
ANTI-DRIPPING SYSTEM
This iron is equipped with drip stop function: the iron automatically
stops steaming when the temperature is too low to prevent water
from dripping out of the soleplate.
With the anti-dripping system, you can perfectly iron even the most
delicate fabrics.
Summary of Contents for Krollfritt
