Wilfa THS-2000, Instruction Manual

corresponds to voltage indicated on the appliance. 

It is a class I appliance and 

must be earthed.     

3-SAFETY  

CAUTION: Before fitting or removing the appliance, ensure that the 

heater's power line supplying the heater is disconnected.   

■

    This appliance is designed for use in gardens ,and any room in your house, 

including those where there is a risk of splashing. The installation and use 
of your appliance must comply with the applicable standards in your 
country. 

■

    When it is switched on, an electrical heating appliance reaches very high 

temperature able to cause burns. Make sure that all other users are aware 
of the risks. 

■

    If you have any doubts concerning installation possibilities for this heater, 

please consult a qualified electrician. 

■

    Children, the elderly and the infirm may not always be aware of the danger 

involved in using electrical appliances. Never allow this appliance to be 
used without supervision.   

■

    The appliance must be positioned so that the plug is accessible. 

■

    If the supply cord is damaged, it must be replaced by the manufacturer or 

its service agent or similar qualified person in order to avoid a hazard

■

    Do not use this heater with a programmer, timer or any other device that 

switches the heater on automatically, since a fire risk exists if the heater is 
covered or positioned incorrectly

. 

■

    Do not place the appliance close to curtains and other combustible 

materials. 

■

    The heater must not be located immediately below a socket-outlet.     

■

    The heater must be installed at least 1,8 m above the floor.     

4-HOW TO ASSEMBLE      

■

Before installing your appliance, you must disconnect the electrical supply 

at the circuit breaker. In order to avoid overheating, do not cover the heater 
Do not place the appliance close to curtains and other combustible materials.