Wilger
Installation and Operation Manual
Wilger Electronic Flow Monitoring System
Page | 9
Figure 13. ECU to Product Node Y-Adapter Cable
The ECU to Node Y-adapter cable is used only when plumbing manifolds and EFM
components cannot be centrally located on the application equipment.
In situations that dictate the EFM components and plumbing manifolds must be
located alongside the application equipment’s length, the Y-adapter can be used to
minimize the amount of extra wiring and/or extension harnessing required.
For proper use and labeling of a Y-adapter, reference Appendix 1.
Tablet and EFM App
The Electronic Flow Monitoring (EFM) System includes an Android app that runs on
an Android tablet computer located in the the tractor cab.
Figure 14. EFM on an Android Tablet Computer
The EFM app (downloadable from
, GooglePlay and Amazon
Appstores) is simple to operate and interpret. It provides a highly customizable
visual indication of flow rates for each sensor. Up to three different products can be
shown at a time. Up to 196 sensors (shared across the three products) can be
monitored.
Flow alarm thresholds are easily changed for any of the three products. Green balls
indicate a sensor is within the threshold; yellow indicates the flow is approaching, or
past the threshold; red indicates a serious flow alarm condition.
NOTE:
The EFM apps available from
and from most Android app
stores.
