Accupoint Positioners
PM-01010-REV 2
1-25
May 2022
Table 1-6 provides the part numbers for the standard cables.
Table 1-10 Standard Accupoint Power/Data Cables
Will-Burt
Part Number
Length
610/05175
10m (33 ft)
610/05182
20m (66 ft)
610/05183
30m (98 ft)
1.6.6 Positioner Power Supply
1.6.6.1 AC/DC Converter
The positioner power supply (P/N: 208016) (Figure 1-14) is used in systems using 110VAC
(50 or 60 Hz) or 240VAC (50 or 60 Hz) to convert the AC power to 24VDC input power for
the positioner. The power supply has short circuit, overcurrent, overvoltage, and over
temperature protections. It is an IP67 design and is suitable for dry, damp, or wet locations.
Figure 1-14 Positioner Power Supply
1.6.6.2 Step Up Converter
The step-up converter (P/N: 208012) (Figure 1-15) is used in systems with 12VDC input
power to step up the power to 24VDC for the positioner.
Summary of Contents for ACCUPOINT AP-50
Page 2: ......
