8
EN
Color codes (WiFi control light)
The heater has not been connected to WiFi. The heater keeps an even
temperature throughout the whole day and night.
The heater is online in the Willheat cloud
1. The heater’s WiFi is deactivated by the user
2. When installing/connecting the Willheat-app and cloud, the light will flash
in various speed. This is normal.
The heater has a problem connecting to or finding the WiFi signal. Please do
the following:
1. Please turn the heater OFF and ON again
2. Please restart the WiFi router
3.
number of active devices connected at the same time
4. Please make sure 2,4 Ghz is activated. If the problem persists we
installation 5 Ghz can be activated again.
Before use:
Be aware that the Willheat-app must be installed before you can connect your
heaters to your WiFi network. You can then simply follow the instructions given in the
app when connecting your heaters. The heaters will connect directly to your router via
WiFi with 2,4 Ghz mode b/g/n. Minimum OS requirement: iOS 8.0 and Android 4.0.
Go to willheat.cn for more information. If you have any questions regarding the
Willheat-app, connecting to WiFi or other relating questions please contact us on
our Will service phone number: 18028174505.
If you have a firewall please do the necessary amendments in order to connect
your heater to WiFi.
ATTENTION! The heaters will be connected directly to your WiFi router and it
number of active devices connected at the same time.
