A A
A A
–
+
+
–
ALKALINE/
NiMH SWITCH
A566
SQUELCH
ADJUST
Operating Instructions
1. Open battery compartment door on back of receiver by
pressing the tab down.
2. If using rechargeable NiMH batteries, slide the Alkaline/
NiMH switch to the NiMH position (Figure 1). Default
setting is Alkaline for non-rechargeable batteries.
Figure 1: Battery selection switch
3. Insert 2 AA batteries over the fabric strip. Note correct
polarity (+/-).
4. Insert earphone or neckloop into the headphone jack
(Figure 2).
5. Choose the channel by rotating the channel selector
knob to the desired channel number (Figure 2).
6. Turn Receiver ON and adjust volume control as needed
(Figure 2).
