P05
www.william-optics.com
P06
Step-1
Extract the black plastic screw
and place the finder bracket on
ZenithStar focuser and attach with
lock screw.
Step-1
Using the supplied L-Bracket, attach the
telescope to the tripod threaded with a
standard photographic connection knob.
Ensure that the knob is tight or locked down
before proceeding.
After the telescope is firmly connected to the
tripod, extend the dew shield.
Loosen lock screw for release.
Remove 2" to 1.25" adapter.
Tighten lock screw.
Tighten lock screw.
Insert eyepiece for
visual observation.
Step-2
Step-3
Step-4
Finder Bracket Lock Screw
Finder Bracket
Step-2
Insert finderscope into
finder bracket.
Step-3
Insert illuminator.
into finderscope.
Unscrew the knob of illuminator.
Remove the knob from finderscope.
Crafting the Earth's Finest
Astronmical Instruments
Step-3
Tighten the knob
on finderscope.
Adjust the alignment screws.
connection point
for finderscope bracket
Connection Instructions
( 2" Erecting Prism )
Connection Instructions
( Finderscope )
