English
10
Internal T-Coil Switch and Indicator LED
Pocketalker: Right Side View
+
–
+
–
A544
T-Coil Switch
(in “On” position)
T-Coil “On” LED
USB Micro-B
Charging Port
External Microphone
Jack
Battery
Compartment
Lanyard Slot
Clip
Internal Microphone
Clip
Battery
Cover
Battery
Type*
Switch
AAA
Batteries
NiMH* or
Alkaline*
Power On/Off
and
Volume Adjust
Rotary Dial
Power “On”
Green LED
Lanyard Slot
Headphone/
Earphone
Jack
Tone Adjust
Rotary Dial
NiMH
Alkaline
SLIDE
PRESS HERE
WHILE SLIDING
+
–
+
–
Balance
Control
(Fully
counter-
clockwise
= Mono)
Left Right
(Mono)
Balance
Adjust
Charging LED
indicator
T-Coil Symbol
Power On
Adjust
Volume-
Power Off
Adjust
T-coil
Switch
Tone
Adjust
Dial
Note:
For best performance when using the t-coil feature, the
Pocketalker must be in a
vertical
orientation. This ensures the best
magnetic coupling to the loop system.
Recharging NiMH Batteries
The Pocketalker can recharge NiMH batteries when used with an
optional BAT KT7 (US) or BAT KT8 (International) charging kit.
1. Verify or change battery switch to the NiMH position.
2. Verify or insert NiMH batteries into battery compartment.
3. Using the included USB A to USB Micro-B cable, plug the
USB Micro-B end into the USB Micro-B charging port on
the Pocketalker. Plug the USB A end into the USB A port
on the power supply included with the charging kit. Plug
the power supply into a wall outlet.
4. The charging indicator will blink slow while charging, and
then will stay on solid when the unit is charged.
WARNING!
Do not attempt to charge Alkaline batteries!
