Page
3
of
4
Assembly Instructions:
Livingston Single Top (A) and Livingston Single Drawer Pedestal File (B)
1. Open upper drawer of Livingston Single Drawer Pedestal File (B). Attach the Single Top (A) on the top of the
Pedestal File (B). Insert the Allen Bolts (D) through the holes on top frame of the Pedestal File (B) into the
inserts on the Single Top (A). Tighten with the Allen Key (E) as shown in
fig. 1 illustration. 1
.
Fig. 1
Illustration. 1
.
2. Close the drawer of Livingston Single Drawer Pedestal File (B) back to the previous position as shown in
fig. 2
.
Fig. 2
3.
If the floor is uneven adjust the recessed levelers found on the bottom of the furniture as shown in
illustration.
3
.
Carefully grasp one side of the furniture and elevate it slightly to provide access to levelers. Turn the leveler
until adequate contact will be made with the floor. Carefully set the furniture down. Repeat until the furniture sits
level and stable.
Illustration. 3
Care Instructions:
Dust often using a clean, soft, dry and lint-free cloth.
Blot spills immediately and wipe with a clean, damp, cloth.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
A
B
