Digi-Wave Dock Application Guide
10
Range Extender
The Digi-Wave Dock can be used to extend the range of an existing Digi-wave System - for reaching a larger audience, reaching
audiences in additional rooms or areas, or for establising two-way communication that is outside the normal range of wireless operation
(shown).
How it works:
In Building A, a talker’s voice is transmitted from a handheld DLT to a docked DLT. The dock sends the received audio through it’s output,
through the first XLR cable, to the input of a second dock in Building B. The second dock has a DLT transceiver that broadcasts the audio
to a person listening with a handheld DLT. When the person in Building B speaks, audio travels from the handheld DLT, to the docked DLT,
and back along a second XLR cable to Building A where it enters the first dock’s input, completing a two-way communication path. The
length of the range extension is limited by the type of XLR cables used, but can be as much as 500 feet or even much more.
Required Equipment:
Two Digi-Wave docks, two long XLR cables, and 4 DLT Transceivers
(2) XLR cables
Distanc
e = 500 f
t or mor
e
Building A
Building B
Docked
DLT
Docked
DLT
Handheld
DLT
Handheld
DLT
