Digi-Wave Dock Application Guide
20
Extending a 2.0 Series system with 300 Series Product
The 2.0 series systems are not directly compatible with the newer 300 Series systems. However, by using the Digi-Wave Dock, these
systems can now be used together. The dock can also be used to
extend the range
of a 2.0 system by adding 300 Series product.
How it works:
A DLT 100 2.0 is inserted into one bay, and a DLT 300 is inserted in the second bay. The bays are tied together with standard XLR cables,
routing the outputs of each bay to the inputs of the other bay. By doing this, two-way communication is established. The DLTs are set to
2-way mode. Audio level adjustments will need to be made to balance voices.
Required Equipment:
One Digi-Wave dock, one DLT 100 2.0, one DLT 300, two XLR cables, and talker DLTs per system as required (in this example, three DLT
300’s and two DLT 100 2.0’s).
2.0 Series System
300 Series System
