Digi-Wave Dock Application Guide
3
Purpose of this Guide
The Digi-Wave Dock provides a way to:
(a)
connect
Digi-Wave wireless product
to a hard-wired system,
(b) hard-wire wireless product together, and
(c)
charge
Digi-Wave DLTs and/or DLRs
This guide is designed to present various ways the Digi-Wave Dock can be utilized. The dock is a versatile piece of equipment, and the
following examples are by no means exhaustive. These examples are provided as a starting point for more creative or complex uses.
“
DLT
” in this guide refers to DLT 300 or DLT 100 2.0.
“
DLR
” in this guide refers to DLR 60, DLR 60 2.0 or DLR 360.
Note: The DLT 100 and DLR 50 units do not have active audio pins to send or receive audio through the 30-pin connector on the Dock. So
these units cannot be used in any of the scenarios described in this guide. The DLT 100 can be charged in the dock (only).
Cannot
be used in
any
scenarios this guide:
DLT 100
DLR 50
Can
be used in applicable scenarios in this guide:
DLT 300
DLT 100 2.0
DLR 360
DLR 60 2.0
DLR 60
