Digi-Wave Dock Application Guide
8
Teleconferencing
The dock provides full duplex audio capability when a DLT Transceiver is docked. Utilized in this way, two-way communication can be
established between two conference rooms, with audio sent/received over the internet. People on both sides can speak/listen with
DLT transceivers, or just listen with DLR receivers. A program such as Skype or other teleconference software can be used to make the
conference call over the internet. The two-way audio from each dock is connected to the computer in that conference room, and the audio
from the dock is routed into a sound system in that room. Additional DLTs can be added for hearing assistance, asking and answering
questions, or for presentations where a person will be standing or walking.
How it works:
In Conference Room 1, people’s voices are picked up using the internal microphone
*
on a portable DLT
on the conference room table.
This audio is transmitted to a docked DLT. The dock sends the audio through it’s outputs to a computer. The computer sends the audio
through the internet where it is received by a computer in Conference Room 2. The computer in Conference Room 2 sends its audio to a
sound system for people in Conference Room 2 to hear. Additional DLTs can be used for hearing assistance or Q&A.
In the same manner, audio is sent from Conference Room 2 to Conference Room 1. Typically this type of system is coupled with a video
screen in each conference room, so the people in both locations can see each other.
*
a conference microphone could also be used for improved pickup of multiple voices (not shown)
Required Equipment:
Two Digi-Wave Docks, four DLTs, four 3.5mm to RCA cables, conference microphone if desired
Conference Room 1
Conference Room 2
VOL
UME
POWE
R
HE
ADPH
ONE
PO
WER A
MPLIF
IER
PO
WER
CO
MPU
TER
VOL
UME
POWE
R
HE
AD
PH
ONE
PO
WER A
MPLIF
IER
PO
WE
R
CO
MPU
TER
