background image

DLT 100 2.0 Digital Transceiver

Specifications

Battery life

Up to 14hrs talk time per charge

Charge time

5hrs. TFP 045 with cable and international adapters. Optional 

two-bay charger CHG 102

Channels 

Up to 15 simultaneous channels (Interpretation mode)

Up to 4 simultaneous groups

Operating frequencies

2.4GHz (ISM band) 2.402 – 2.476GHz FHSS

Range

Up to 100ft outdoors and 200ft indoors*

Speaker

Internal speaker (disabled when ear jack is engaged)

Indicators

LCD - Group, channel, volume level, battery status, mode, 

signal strength)

LED’s - charge status, group change

Red LED ring around talk button - on when TALK enabled

Amber LED - signifying group change feature activated

Maximum presenters

Two presenters at any given time

Approvals

FCC, Industry Canada, CE, C-tick, RoHS, WEEE

Warranty

2 years parts and labor (90 days on accessories).

*Depending on environmental conditions  

Customer Service

If you experience difficulty with your system, call Toll-Free for Customer 

Assistance:

1-800-843-3544 (U.S.A.) or 
+1 952 943 2252 (Outside the U.S.A.)

If it is necessary to return the system for service, your Customer Service 

Representative will give you a Return Authorization Number (RA) and 

shipping instructions.
Pack the system carefully and send it to:

Williams Sound 

Attn: Repair Dept.

10300 Valley View Rd.

Eden Prairie, MN 55344

Summary of Contents for DLT 100 2.0







Reviews: