background image

FCC Registration Notice

Your new PhoneMax product has been registered with the Federal Communications Commission (FCC). This
product complies with standards in Part 68 of the FCC Rules. The FCC requires us to provide you with the follow-
ing information:

1.

Connection and use with the nationwide telephone network
The FCC requires that you connect your product to the nationwide telephone network through a modular
telephone outlet or jack.  The modular telephone outlet or jack to which the telephone must be connected
is a USOC RJ-11C or RJ-11W.

This equipment may not be used with Party Line Service or with Coin Telephone Lines.

2.

Notification to the telephone company
The FCC requires that upon request of your local telephone company, you provide the following informa-
tion:

A.

The ‘line’ to which you will connect the telephone equipment (your phone number).

B.

The telephone equipment’s FCC registration number and Ringer Equivalence Number (REN). These
numbers are on the back or bottom of your telephone equipment.
The REN is useful to determine how many devices you may connect to your telephone line and still
have them ring when your telephone line is called. In most, but not all areas, the sum of all REN’s
should be 5 or less. You may want to contact your local telephone company if you experience prob-
lems.

3.

Repair instructions
If it is determined that your telephone equipment is malfunctioning, the FCC requires that it not be used
and that it be unplugged from the modular outlet until the problem has been corrected.  Repairs to this
telephone equipment can only be made by the manufacturer or its authorized agents or by others who
may be authorized by the FCC.  For repair procedures, follow the instructions under the section entitled
Warranty.

4.

Rights of the telephone company
If your product is causing harm to the telephone network, the telephone company may temporarily dis-
continue your telephone service.  If possible, they will notify you before they interrupt service.  If advance
notice isn’t practical, you’ll be notified as soon as possible.  You’ll be given the opportunity to correct the
problem, and you’ll be informed of your right to file a complaint with the FCC.

Your telephone company may make changes in its facilities, equipment, operations, or procedures that
could effect the proper functioning of your PhoneMax product.  If such changes are planned, you’ll be
notified.

5.

This telephone is compatible with inductively coupled (Telecoil) hearing aids.

Interference Information: Part 15 Of FCC Rules

Some telephone equipment generates and uses radio-frequency energy and, if not installed properly, may cause

interference to radio and television reception.

Your PhoneMax product has been tested and found to meet the standards for a Class B computing device, as spec-

ified in Subpart J of Part 15 of the FCC Rules. These specifications are designed to provide reasonable protection

against such interference in a residential installation. However, there is no guarantee that interference will not

occur in a particular installation.

If your PhoneMax product causes interference to radio or television reception when it’s in use, you might correct

the interference with any one of these measures.

1.

Where it can be done safely, re-orient the receiving telephone or radio antenna.

2.

To the extent possible, relocate the television, radio or other receiver with respect to the telephone equip-
ment.

  Williams Sound 

®  

Helping People Hear

15

PhoneMax

®

Model TEL 030

Installation Guide & User Manual

Summary of Contents for PhoneMax TEL 030

















Reviews: