Williams Sound
®
Helping People Hear
7
PhoneMax
®
Model TEL 030
Installation Guide & User Manual
Step 5: Perform either Table/Desk installation or Wall installa-
tion as outlined on the following pages.
For Table/Desk Installations
Step 1: Plug the long line cord into the jack on the back of
the telephone base.
(see Fig. 5)
Step 2: Plug the other end of the line cord into a modular
baseboard jack. Make sure both ends snap into place
firmly.
(see Fig. 5)
Step 3: Lift the handset and check for dial tone. If you don’t
hear a dial tone, see
In Case Of Difficulty, page 12
.
Note:
To disconnect, squeeze the clip on the plug and pull
it out from the jack.
For Wall Plate Installations
If you prefer, the PhoneMax can also be mounted on a stud-
ded wall phone plate. If you don’t have a phone plate
installed, talk to your phone company or local phone prod-
ucts store.
Step 1: Clip the plastic wall mounting bracket (included) into
bottom of the PhoneMax base unit.
(see Fig. 7)
Make
sure the tabs snap in securely. This will make the
base unit level with the wall.
Step 2: Rotate the handset hanger found in the handset cra-
dle to prevent the handset from falling.
(see Fig. 6)
Fig. 5: Line Cord Connection
