7
PhoneMax
®
Model TEL 030
Installation Guide & User Manual
Step 5: Perform either Table/Desk installation or Wall installation
as outlined on the following pages.
For Table/
Desk
Installations
Step 1: Plug the long line cord into the jack on the back of the tele-
phone base.
(see Fig. 5)
Step 2: Plug the other end of the line cord into a modular baseboard
jack. Make sure both ends snap into place firmly.
(see Fig.
5)
Step 3: Lift the handset and check for dial tone. If you don’t hear a
dial tone, see
In Case Of Difficulty, page 12
.
Note: To disconnect, squeeze the clip on the plug and pull it out
from the jack.
For Wall Plate Installations
If you prefer, the PhoneMax can also be mounted on a studded wall
phone plate. If you don’t have a phone plate installed, talk to your
phone company or local phone products store.
Step 1: Clip the plastic wall mounting bracket (included) into bot-
tom of the PhoneMax base unit.
(see Fig. 7)
Make sure the
tabs snap in securely. This will make the base unit level with
the wall.
Step 2: Rotate the handset hanger found in the handset cradle to
prevent the handset from falling.
(see Fig. 6)
Step 3: Plug the short line cord into the jack on the top of the tele-
phone and thread the line through the channel to the cavity
on the back of the base unit.
Fig. 5: Line Cord Connection
