Installation Guide & User Manual
PhoneMax
®
Model TEL 030
8
Step 4: Hold the telephone next to the wall-phone jack and plug the
line cord into the jack, leaving any slack in the base unit cav-
ity. Then push the phone against the mounting studs so the
studs are hooked into the upper and lower keyhole slots of
the phone. Slide the phone down until it snaps into place.
(see Fig. 7)
Step 5: Check for a dial tone. If you can’t hear a dial tone, see
In
Case Of Difficulty, page 12
.
Note: To remove a wall-mounted telephone, slide the phone up
and pull it slightly away from the wall. Disconnect the line
cord by squeezing the clip on the modular plug and pulling it
from the jack.
Wall Mount
Bracket
Short Wall Cord
Studded Wall
Phone Plate
Fig. 7: Wall Installation
Handset Hanger
Lift up, rotate 180º, and release
Fig. 6: Handset Hanger Adjustment
