Page 18
Rev. 1/2019
www.willoughby-ind.com
Installation & Operation Manual
Aquafount
®
180° Washfountain
WAF-5403 Series / WAF-5404 Series
Willoughby Industries, Inc.
TOLL FREE
(800) 428-4065
● LOCAL
(317) 875-0830
● FAX
(317) 875-0837
Step 5: Final Assembly
Parts supplied:
•
Solid Surface Top Cover
•
Access Cover
•
1/4-20 Tinnerman Nut
•
1/4-20 x 1" Security Screw
•
1/4-20 x 1-1/2" Flat Head
Security Screws
1�)
Make all final plumbing connections to valve inlets using supplied flex hoses (flex hoses have
shut-off valves attached that should be connected to the supply inlets).
2�)
Once all of the connections in the actuator housings are complete, locate the transformer.
NOTE: PLUG-IN TRANSFORMER (IF NEEDED) MUST BE USED WITH A GROUND FAULT
INTERRUPT (GFCI) RECEPTACLE TO HELP PREVENT POSSIBLE ELECTRICAL SHOCK.
3�)
Test the system for leaks (both supply and waste).
4�)
Using 1/4-20 x 1-1/2" flat head security screws, attach top cover to the actuator housing.
5�)
Using 1/4-20 x 1" security screws, attach shroud to the backplate.
Installation Instructions (cont.)
TOP COVER
1/4-20 X 1-1/2" FLAT HEAD SECURITY SCREW
1/4-20 X 1/2"
SECURITY SCREW
ACCESS COVER
