background image

WELS-2230   ENVY SERIES 

    

SINGLE STATION SOLID SURFACE LAVATORY SYSTEM

  INSTALLATION & OPERATION MANUAL

PAGE

 13

© Rev. 

3/2021

1.800.428.4065  

TOLL FREE 

| www.willoughby-ind.com

Aquasurf® Solid Surface Products are a  homogeneous blend of resins, mineral filler and colorant 

manufactured for panels, molded and/or shaped products and components. Aquasurf® Solid 

Surface products provide a luxurious appearance with the durability of stain proof, impact resistant, 

burn resistant material with ease of maintenance and cleaning.

Willoughby Industries, Inc. warrants to commercial and institutional purchasers only that each unit 

will be free from defects in workmanship and materials under normal use and service upon the 

following terms and conditions. The period during which Aquasurf® components are warranted as 

follows:

1.  Aquasurf® solid surface components are warranted for 2 years from date of shipment.

2.  All other components warranted for 1 year from date of shipment.

This warranty does not cover installation or any other labor charges and does not apply to any 

components damaged by accident, abuse, improper installation or improper maintenance. This 

warranty does not cover any installation that did not comply with national, state and local building, 

plumbing or electrical codes. The warranty is limited to replacing or repairing at Willoughbys option, 

transportation charges prepaid by the purchaser, any Aquasurf® component or part which upon our 

inspection shall be deemed as defective within the limitations of this warranty. The replacement or 

repair of defective units as stated in this warranty shall constitute the sole remedy of the purchaser 

and the sole liability of Willoughby Industries, Inc. Willoughby Industries, Inc. shall not otherwise be 

liable under any indirect damages caused by defects in the repair or replacement thereof.

This warranty only extends to commercial and institutional purchasers and does not extend to any 

others, including consumer customers of commercial institutional purchasers. This warranty is in 

lieu of all other warranties, expressed or implied, including implied warranty of merchantability or 

fitness or a particular purpose or otherwise.

WARRANTY

Summary of Contents for ENVY Series














Reviews: