WH-2600 SERIES
PATIENT CARE UNITS
INSTALLATION & OPERATION MANUAL
PAGE
11
© Rev.
2/2017
1.800.428.4065
TOLL FREE
| www.willoughby-ind.com
INSTALLATION INSTRUCTIONS (CONT.)
Step 8: Install Faucet and Connect Water Supply
NOTE: Please refer to faucet manufacturer’s recommended installation instructions.
Step 9: Completing Installation
1.)
Connect the fl ush valve outlet to the water closet.
NOTE: Tighten all fl ush valve connections.
2.)
Connect the fl ush valve water supply pipe to the fl ush valve 1” NPT inlet.
3.)
Install Push Button Actuator plastic tubing.
4.)
Install the P-trap (supplied by installer) to the sink drain, and then connect the P-trap to the
drain pipe (piping supplied by installer).
5.)
On models with a bedpan washer sprayer, connect sprayer hose to vacuum breaker outlet
inside cabinet.
6.)
Check all water and waste connections for leaks.
